OPERATION
•SWITCHING THE UNIT ON/OFF Switch on the unit by pressing any
button (except OPEN/CLOSE button (7)). When system is on, press 
button
(9) to turn off the unit.
•FACEPLATE RELEASE
Press OPEN/CLOSE button (7) to slide down the removable faceplate down.
•SOUND ADJUSTMENT
Press PUSH SEL button (10) to select the desired adjustment mode.
The adjustment mode will change in
the following order:
| VOL |
|
|
| BAS |
|
|
| TRB |
|
|
| BAL |
|
|
| FAD |
|
| (Volume) |
|
| (Bass) |
|
| (Treble) |
|
| (Balance) |
|
| (Fader) | |||||
|
|
|
| |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
By rotating the volume knob (10) clockwise or
•LOUDNESS
Press BND/LOU button (13) for several seconds to reinforce the bass output. Press it for several seconds again to release this function.
•SET THE CLOCK
Press the DSP button (15), the clock is displayed on the LCD display. Then hold down the button until the clock
flashes. Then press the 
button (17)
to change hours or 
button (16) to change minutes.
•MUTE
Press MUT button (3) to mute the volume instantly. If any button is pressed while in the mute mode, the mute function is released.
•EQUALIZATION
Press EQ button (19) to turn on equalization function and to select
desired audio mode. There are four
kinds of mode as below:
FLAT
CLASSICS
POP M
ROCK M
DSP OFF 
•LIQUID CRYSTAL DISPLAY
Shows current frequency and activated functions on the display (8).
•FLASHING LED
If the front panel does not install in the main unit, the LED (4) will be flashing.
•REMOTE SENSOR
Point the remote control handset to the remote sensor IR (11). Press the function keys on the handset to control the system.
•RESET FUNCTION
RESET button (12) must be activated with either a ball point pen or thin metal object. The RESET button (12) is to be activated for the following
reasons:
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
Note: If you press RESET button (12) and the unit still does not work, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel.
RADIO OPERATION
•SWITCHING TO RADIO MODE Press MOD button (6) to select radio mode, the radio mode appears in the display together with the memory band and frequency.
•SELECTING THE FREQUENCY BAND
In radio mode, press BND/LOU button (13) to select the desired band.
The reception band will change in the following order:
FM1
FM2
FM3
AM
•SELECTING STATION
Press 
button (17) or 
button (16) shortly to activate automatic seek function. Press for several seconds until “MANUAL” appears on the display, the manual tuning mode is selected. If 
buttons (16) and 
button (17) have not been pressed for serveral seconds, the unit returns to seek tuning mode and “AUTO” appears on the display.
•LOCAL/DISTANT
Press LOC button (2) to select between local and distant stations. Local setting is for reception of strong stations and distant setting is for reception of weaker setting. This function is effect during AUTO SEEK operation.
•AUTOMATIC MEMORY
STORING & PROGRAM SCANNING
-Automatic Memory Storing
Press AMS button (18) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. Then the 6 strongest
9
