Studer Innotec AJ SERIES manuel dutilisation Safety, Failure Consequence Solution

STUDER INNOTEC AJ

Safety

The inverter is electronically protected. But protection against polarity inversions of the battery occurs with an internal fuse, except for AJ 2100-12 inverter, which has no fuse. The following table will show you the different failures and their consequences.

FAILURE	CONSEQUENCE	SOLUTION
Low battery voltage	Inverter momentarily	Automatic restart when the
Voltage < 1.8V/cell	stopped, the green	battery voltage rises
	indicator blinks.
Deep discharged battery	Inverter stopped	Inverter should be manually
(voltage <1,5V/cell)		restarted when the battery
		as reach 2V/cell
Overheating	Inverter momentarily	Automatic restart when the
	stopped, the green	temperature reaches the
	indicator blinks.	normal range.
Battery over voltage	Inverter stopped.	Wait until the battery voltage
		reaches the correct level.
		Push the ON/OFF switch to
		reactivate the inverter
Short circuit in the outlet	Inverter stopped.	Eliminate the short circuit.
		Push the ON/OFF switch to
		reactivate the inverter.
Overload	Inverter stopped.	Use the inverter only in the
		range of its nominal power.
		Regular use in overload
		power diminished the
		lifetime of the inverter.
		Push the ON/OFF switch to
		reactivate the inverter.
Inversion of the battery	Internal fuse broken down	Back to manufacturer for
polarity		testing

AJ V2.1 6/24