Studer Innotec HPC 2800-12, HPC 4400-24, HPC 600-48, HPC 6000-48 English description

STUDER INNOTEC HP-COMPACT

HP-COMPACT V5.4 5/80

English description

This manual is part of the delivery package of every HP-COMPACT inverter-charger.

It serves as guidelines for safe and efficient operation of HP-COMPACT. The

instructions are only valid for use with the following devices and options:

− HP-COMPACT : HPC 2800-12 – HPC 4400-24 – HPC 6000-48– HPC 8000-48

− Temperature sensor : CT-35

− Remote Control : RCC 01

− Remote power sharing : RPS-01

Every person who installs a HP-COMPACT and/or works with it must be fully familiar

with the content of this manual and must follow exactly all the warning and safety

instructions. Installation of or any work on the HP-COMPACT must be carried out by

a skilled and trained personnel. Installation and application must comply with the

respective local installations codes and safety regulations.

During production and assembling, all HP-COMPACT appliances go through many

controls and tests. Production, controls and tests are carried out in accordance with

firm and established procedures. Every HP-COMPACT has its own serial number,

which helps to refer back to its original data in the event of controls or repairs. That is

why you should never remove the identification plate showing the serial number. The

production assembly and tests on all HP-COMPACT appliances are totally carried

out in our company in Sion, Switzerland. The warranty for these appliances is valid

for uses and operating possibilities mentioned in this manual.

The warranty period for the HP-COMPACT is 2 years.

We do not accept any liability for any damages occurring through use, manipulation,

working situation and handling, which are not explicitly mentioned in these operating

instructions.

Following cases are not covered by the warranty:

− High voltage at INPUT (i.e. 48V at the Battery INPUT of HP-COMPACT 2800-

12)

− Reverse polarity on Battery connections (+/- reversed)

− Running liquid or oxidation through condensation in the appliance

− Defects caused by force, physical or mechanical means

− Changes not explicitly authorized by STUDER INNOTEC

− Not or only partly tightened screws and nuts after change of fuses or cables

connecting

− Transport damage, i.e. through bad handling and /or packing

− Damage from atmospheric over voltage (lightning)