Sub-Zero Model 315W Wine Storage Operation Wine Storage Shelves, Wine Storage Shelf Removal

Model 315W Wine Storage Operation 6

Wine Storage Shelves

Model 315W has roller-assembly shelves with a full three- quarter extension for easy access to all stored bottles. Each wine shelf holds four (750 ml) bottles. An additional two bottles may be placed on the bottom stationary shelf for a total capacity of 26 bottles. Refer to the illustration below.

IMPORTANT NOTE: Never keep anything other than wine bottles on the wine shelves; smaller beverage bottles are unstable and may easily fall out and break.

The shelves have a solid natural cherrywood facing that can be replaced with other wood to match your cabinetry. Details on how to replace the shelves’ wood facing can be found in the Sub-Zero design guide. Check our website at subzero.com.

IMPORTANT NOTE: If you choose to stain or seal the shelves’ natural cherrywood facing, be aware that some of these substances are hazardous and will damage wine.

WINE STORAGE SHELF REMOVAL

To remove a wine storage shelf, pull the shelf out to its full extension, gently and evenly lift up on both sides of the front of the shelf and remove. Reverse the procedure to reinstall the shelf.

IMPORTANT NOTE: Wine storage shelf removal will be more difficult if the door cannot open to a minimum of 120°, as in a corner application.

Be sure to unload all bottles from the wine storage shelf before removing it.

Wine storage shelves.