Sub-Zero Model 315W Wine Storage Care, Interior Lighting, Cleaning, Light Bulb Replacement

Model 315W Wine Storage Care 7

subzero.com

Interior Lighting

LIGHT BULB REPLACEMENT

Interior lighting for model 315W is located in the top of the cabinet. The light bulb has an extended life and it should be some time before it needs to be replaced.

Replacement bulbs are available from Sub-Zero factory certified service. For the name of the factory certified service nearest you, check the contact & support section of our website, subzero.com or call Sub-Zero customer care at 800-222-7820.

To replace the light bulb, shut off power to the unit. Remove the top wine storage shelf. Pull the plug from the socket in the top of the unit as shown in the illustration below. Remove the bulb from its holder and install the new bulb.

Shut off power to the unit before replacing the light bulb. Wear protective gloves when handling the bulb.

LIGHT BULB

PLUG

Light bulb replacement.

Cleaning

STAINLESS STEEL EXTERIOR

To clean the stainless steel exterior of the model 315W/S, use a soft, nonabrasive stainless steel cleaner like Signa- ture Polish and apply with a soft lint-free cloth.

Signature polish is available from Signature Limited Laboratory, P. O. Box 13436, Dayton, Ohio 45413, or call 877-376-5474.

To bring out the natural luster of the stainless steel, lightly wipe the surface with a water-dampened microfiber cloth followed by a dry polishing chamois. All work should follow the grain direction of the finish. Better results are obtained by keeping the cloth in continuous contact with the stainless steel.

INTERIOR SURFACES

To clean interior surfaces and removable parts, wash with a mild solution of soap and lukewarm water with a little baking soda. Do not use vinegar. Rinse and dry thor- oughly. Avoid getting water on lights, controls and the solid cherrywood facing on the shelves.

Do not use abrasive cleaners or cloths on any interior or exterior surfaces, including the glass door panel.

GLASS DOOR

The glass door panel can be cleaned using any standard glass cleaner available on the market today.

Before cleaning the unit, shut off power to the unit by turning the control knob to OFF.