Sub-Zero 601F dimensions S I D E P A N E L S, H A R D W A R E C O N S I D E R A T I O N S

Planning Information

Built-In Model 601F

S I D E P A N E L S

237/8" (606)

BEHIND FRAME

4" (102)

3" (76)

Cut-outs for grille and toe kick area

S I D E P A N E L S

Side panels can be used with the framed, overlay and stainless steel design applications. When planning for side panels with the installation of the Built-In model, you need to be aware of space configuration to achieve a pleasing fit. Depending on the exact panel you are using with your unit, the height of the panel will vary.

Cut-outs around the toe kick and grille area are required if

a1/4" (6) thick panel will be inserted into the main frame channel. The panel will need to be 24" (610) deep. Refer to the illustration on this page for placement of toe kick and grille area cut-outs. If a 3/8" (10) thick panel is used, the panel will abut the main frame and should be 23 7/8" (606) deep. The toe kick area may or may not be cut out depending on the look you want to achieve.

IMPORTANT NOTE: The use of side panels may change the width of your rough opening.

H A R D W A R E C O N S I D E R A T I O N S

Overlay models come without handle hardware. The beauty of this design is that you can match the surround- ing cabinet hardware. You or the cabinet manufacturer must provide handle hardware to match the overall deco- rating scheme.

The handle hardware must be installed before installing the panel assembly. Use larger D-style handles. If screws with thick heads are used, the screws will need to be countersunk into the door before the panel is put into place. Refer to the full-scale illustrations on pages 11–12 for handle hardware considerations.

IMPORTANT NOTE: Sub-Zero does not recommend using single pull knobs on any of its Built-In models.

Optional stainless steel handles are available in a variety of diameters and lengths in the classic, platinum and carbon stainless steel finishes and polished chrome. Contact your Sub-Zero dealer for specifics. To obtain local dealer information, visit the Locator section of our website, subzero.com.

Dimensions in parentheses are in
millimeters unless otherwise specified.	10