Sub-Zero 601F dimensions F R A M E D P A N E L S, F R A M E D P A N E L D I M E N S I O N S

Planning Information

Built-In Model 601F

F R A M E D P A N E L S

PANELS 1/4" (6) THICK OR LESS

Trim reveal 1/4" (6) min

1/4" (6) Panel

Framed door panel 1/4" (6) thick or less

PANELS THICKER THAN 1/4" (6)

Trim reveal 1/4" (6) min

Rout to 1/4" (6) thickness

Framed door panel thicker than 1/4" (6)

F R A M E D P A N E L S

If the thickness of the custom panels is less than 1/4" (6), they must be backed up with a sheet of shim material to build the total thickness to 1/4" (6). If the panel is thicker than 1/4" (6), an edge must be routed around the panel to ensure a proper fit. Refer to the illustrations on this page.

IMPORTANT NOTE: Routing, recessing or optional extended handles may be required on raised panels for finger clearance under the handle. Refer to the full-scale illustrations on pages 11 – 14.

IMPORTANT NOTE: The weight of each panel cannot exceed 50 lbs (23 kg).

The traditional framed models come with an 11" (279) louvered grille and elegant full-length handle. Optional extended full-length handles that provide additional finger clearance for raised panels are available through your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero.com.

To install framed panels, refer to the installation instruc- tions shipped with each unit. These instructions can also be found on our website, subzero.com.

F R A M E D P A N E L D I M E N S I O N S

	WIDTH	HEIGHT
Door Panel	34 1/8" (867)	5815/16" (1497)
Handle Recess Location	A – 29 15/32" (749)
Maximum Panel Weight		50 lbs (23 kg)

A

14" (356)

W

H

Framed Door Panel

Dimensions in parentheses are in
millimeters unless otherwise specified.	7