Planning Information

Built-In Model 601RG

I N S T A L L A T I O N N O T E S

Refer to the illustrations and specifications for overall dimensions, finished rough opening dimensions and installation specifics.

Allow the door to open a minimum of 90˚ or you'll have problems removing drawers. With the door opening at 90˚, you may have to move drawers slightly to clear the door interior. Refer to the minimum door swing clearance in the specifications chart.

For corner installations, allow for a minimum 3" (76) filler so that the door can open to 90˚. If you're using raised panels, consider using a wider filler. A 90˚ door stop is available as an accessory.

When units are installed side by side, a filler strip is recommended. The width of this filler strip will vary depending on the configuration and panels you use. An anchoring kit may also be used to attach two units together. This kit is available through your Sub-Zero dealer.

Be sure to add the filler strip width to your finished rough opening dimension. In any side- by-side installation without a filler strip, add an additional 1/2" (13) to your combined numbers. This will allow for the proper width.

Refer to the full-scale illustrations at the end of this section for specifics on door openings and filler size alternatives.

If your client has chosen the stainless steel design, the unit will be shipped complete with wrapped stainless steel doors and handle hardware. You will not have to install front panels.

If your client has chosen the framed or overlay design, you will be adding front panels to give the unit the custom Sub-Zero look. The overlay design also allows you to add your own handles, or you may choose accessory handles available through your Sub-Zero dealer. Refer to pages 6–10 for detailed information on adding panels.

The refrigerator door panel must include a cut-out to accommodate the window. Refer to the panel specifications for exact dimensions. The glass portion of the door must be exposed and not covered by any part of the panel.

A 115 volt, 60 Hz, 15 amp electrical supply is required. The supply circuit for this appliance must be protected by a 15 amp fuse or circuit breaker. It is recommended that a separate circuit, serving only this appliance, be provided.

All Built-In models are equipped with a 6' (1.8 m) power supply cord with a 3-prong grounding plug which must be plugged into a mating 3-prong grounding type wall receptacle. Locate electrical within the shaded area shown in the installation illustration.

You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.

To prevent the unit from tipping forward and provide a stable installation, the unit must be secured in place with an anti-tip blocking kit. If there is a solid soffit above the unit with clear- ance between the unit and the soffit of 1" (25) or less, you won't need to block the unit.

For installations with clearances of more than 1" (25), you must block the unit with the anti-tip blocking kit (wood block and hardware) provided with each Built-In unit.

Refer to the Built-In Installation Instructions packed with the appliance, which provides step-by-step procedures for making sure the unit is installed properly.

Dimensions in parentheses are in

millimeters unless otherwise specified.

5

Page 5
Image 5
Sub-Zero 601RG dimensions Installation N O T E S

601RG specifications

The Sub-Zero 601RG is a remarkable addition to the luxury refrigeration market, seamlessly blending cutting-edge technology with sophisticated design. This freestanding refrigerator and freezer combination is engineered to redefine what consumers expect from their kitchen appliances.

One of the standout features of the 601RG is its dual refrigeration system, an innovative technology that maintains optimal temperatures in both the refrigerator and freezer compartments. This system ensures that food is kept fresher for longer by preventing the transfer of air between the two sections, thereby reducing the risk of odors mingling and preserving the integrity of flavors. The refrigerator boasts separate compressors and evaporators, which contribute to enhanced performance and energy efficiency.

The 601RG also features Sub-Zero’s advanced air purification system. This technology utilizes a special filter to eliminate bacteria, mold, and ethylene gas, which can cause food to spoil. With this feature, users can expect a cleaner and healthier environment within their refrigerator, ensuring that fruits, vegetables, and other perishables retain their freshness.

A user-friendly touch control panel enhances the overall experience, allowing homeowners to easily adjust temperature settings for each compartment. With the precise temperature control, users can customize their refrigerator's environment to suit specific storage needs, whether for delicate items like cheeses or hard vegetables.

Additionally, the Sub-Zero 601RG includes a stylish glass door design that serves both functional and aesthetic purposes. The full-height glass allows for effortless viewing of contents while adding a touch of elegance to any kitchen decor. Moreover, the unit is equipped with energy-efficient LED lighting, illuminating the interior and making it easier to locate items even in dim lighting.

In terms of capacity, the 601RG provides ample space, with multiple adjustable shelves and door bins that accommodate various sizes and shapes of food and beverages. This thoughtful storage design maximizes utility while maintaining a streamlined appearance.

In conclusion, the Sub-Zero 601RG is a premier refrigeration solution that combines advanced technology with premium design. Its dual refrigeration system, air purification technology, user-friendly controls, elegant glass design, and efficient storage options make it an ideal choice for discerning homeowners seeking luxury and performance in their kitchen appliances.