WO LF DR AWER MICR OWAVE
I MPOR TAN T NO TE
You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.
EL EC TRI CAL REQU IREMENT S
GROU N DIN G INSTR U CTIO NS
This appliance must be grounded. The drawer microwave is equipped with a cord having a grounding wire with a grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded in accordance with the National Electrical Code and local codes and ordinances. In the event of an elec- trical short circuit, grounding reduces risk of electric shock by providing an escape wire for the electric current.
Improper use of the grounding plug can result in a risk of electric shock. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.
DRAWE R IN ST AL LA TI ON
1)Place the drawer adjacent to the wall or cabinet opening. Plug the power supply cord into the electrical outlet.
2)Carefully guide the drawer into the prepared opening. Avoid pinching the cord between the oven and the wall.
3)Slide the drawer all the way until the mounting flange is flush with the face of the cabinet. See illustration below.
4)Open the drawer. Using the 4 holes on the drawer as a template, pre drill the cabinet using a 1/16" (1.6) bit. See illustration below.
5)Secure the drawer with the 4 screws supplied. See illustration below.
Grounding Pin
Mounting
Flange
4 screws provided
Grounding | Drawer installation |
| Dimensions in parentheses are in |
10 | millimeters unless otherwise specified. |
