Summer Infant M104, M106, M94 GENERAL ASSEMBLY SAFETY PRACTICES, GENERAL ASSEMBLY INSTRUCTIONS

SECTION 1 - SAFETY

YOU ARE RESPONSIBLE for the safe assembly of the machine.

DO NOT ALLOW CHILDREN or other unauthorized persons within the assembly area.

WEAR PERSONAL PROTECTIVE EQUIPMENT which includes a hard hat, eye protection, work gloves and steel toed boots with slip resistant soles.

DO NOT MODIFY the equipment or substitute parts in any way. Unauthorized modiﬁcation may impair the function and/or safety of the machine.

USE SUITABLE LIFTING DEVICE for components which could cause personal injury.

BLOCK UP ANY RAISED PART of the machine. Be sure machine is stable after blocking.

ALWAYS INSPECT LIFTING CHAINS AND SLINGS for damage or wear.

BE SURE LIFTING DEVICE IS RATED TO HANDLE THE WEIGHT.

STOP ENGINE, place all controls in neutral, set parking brake, remove ignition key and wait for all moving parts to stop before serving or adjusting.

BE SURE PRESSURE IS RELIEVED from hydraulic circuits before servicing or disconnecting from tractor.

USE EXTREME CARE when servicing or adjusting.

1.READ AND UNDERSTAND Operator’s Manual before assembly of machine.

2.Reference to “RIGHT” and “LEFT” is determined when machine IS VIEWED FROM THE REAR.

3.Reference to “FORWARD” means TOWARDS THE TRACTOR.

4.Reference to “REAR” means AWAY FROM THE TRACTOR.