Summit 43176 manual Assembly, Side Burner Gas Supply Connections, Connect Gas Supply, Fitting

ASSEMBLY

CONNECT GAS SUPPLY

A 58 inch (1,473.2 mm) corrugated gas line is supplied with the grill. This line needs to pass through the gas inlet opening to the main gas supply.

1) Connect the corrugated gas line to the manifold located on the right hand side of grill under the control panel. Use the 1/2” fl ared gasket (1) to ensure proper seal.

Note: 1/2” flared gaskets are included in the Summit ® Built-In tank cabinet (#21280) or included with your grill.

The corrugated line passes through the “Island Structure” cavity to the regulator connection inside the Summit® Built-In tank cabinet (#21280) or the hose and regulator connection inside the tank enclosure. (Shown below)

2) Uncap one fl are fi tting from the 90º Connection located inside the Summit® Built-In Tank Enclosure.

3) Use the 1/2 inch fl ared gasket to ensure proper seal.

NOTE: Only use the 3/8 inch (12.7 mm) fl ared gasket if you are installing the optional		(1)
	a
side burner.

4) Connect the corrugated gas line to the 90º Connection.

7

	SIDE BURNER GAS SUPPLY CONNECTIONS
	S-440, S-640
1	Corrugated Gas Line to Manifold
2
	Plug unused hole with supplied plug
3
	Use bushing for gas line hole
4
	1/2” (12.7mm) Flared Gasket
5	90° Fitting
6
	Cap (Optional Side Burner)

aTop View

bTop of Box

cBack of Box

dSide View

2

c

b

1

3

4

6

d

5

WWW.WEBER.COM®