General Instructions

Slide out Bottom tray - Remove excess grease, then wash with warm soapy water, then rinse.

Flavorizer® bars and Cooking grates - Clean with a suitable stainless steel bristle brush. As needed, remove from grill and wash with warm soapy water, then rinse with water.

Catch pan - Disposable foil trays are available, or you can line the catch pan with aluminum foil. To clean the catch pan, wash with warm soapy water, then rinse.

Thermometer - Wipe with warm soapy water; clean with plastic scrub ball.

Inside cooking module - Brush any debris off of burner tubes. DO NOT ENLARGE BURNER PORTS (OPENINGS). Wash inside of cooking box with warm soapy water and a water rinse.

Inside Lid - While lid is warm, wipe inside with paper towel to prevent grease build-up. Flaking built-up grease resembles paint flakes.

Stainless steel surfaces - Wash with a soft cloth and a soap and water solution. Be careful to scrub with the grain direction of the stainless steel.

Do not use cleaners that contain acid, mineral spirits or xylene. Rinse well7after cleaning.

Preserve Your Stainless Steel - Your grill or its cabinet, lid, control panel and shelves may be made from stainless steel. To keep the stainless steel looking its best is a simple matter. Clean it with soap and water, rinse with clear water and wipe dry. For stubborn particles, the use of a non-metallic brush can be used.

mIMPORTANT: Do not use a wire brush or abrasive cleaners on the stainless steel surfaces of your grill as this will cause scratches.

mIMPORTANT: When cleaning surfaces be sure to rub/wipe in the direction of the grain to preserve the look of your stainless steel.

Gas Instructions

Install Gas Supply

GENERAL SPECIFICATIONS FOR PIPING

Note: Contact your local municipality for building codes regulating outdoor gas barbecue installations. In absence of Local Codes, you must conform to the latest edition of the National Fuel Gas Code: ANSI Z 223.1/NFPA 54, or CAN/ CGA-B149.1, Natural Gas and Propane Installation Code. WE RECOMMEND THAT THIS

INSTALLATION BE DONE BY A PROFESSIONAL.

Some of the following are general requirements taken from the latest edition of the National Fuel Gas Code: ANSI Z 223.1/NFPA 54, or CAN/CGA-B149.1, Natural Gas and Propane Installation Code for complete specifications.

•This barbecue is designed to operate at 4.5 inches of water column pressure (.163 psi).

•A manual shut-off valve must be installed outdoors, immediately ahead of the quick disconnect.

•An additional manual shut-off valve indoors should be installed in the branch fuel line in an accessible location near the supply line.

•The quick disconnect connects to a 1/2 inch NPT thread from the gas source. The quick disconnect fitting is a hand-operated device that automatically shuts off the flow of gas from the source when the barbecue is disconnected.

•The quick disconnect fitting can be installed horizontally, or pointing downward. Installing the fitting with the open end pointing upward can result in collecting water and debris.

•The dust covers (supplied plastic plugs) help keep the open ends of the quick disconnect fitting clean while disconnected.

•Pipe compound should be used which is resistant to the action of natural gas when connections are made.

•The outdoor connector must be firmly attached to rigid, permanent construction.

mWARNING: Do not route the 10 foot hose under a deck. The hose must be visible.

GAS LINE PIPING

•If the length of the line required does not exceed 50 feet, use a 5/8" O.D. tube. One size larger should be used for lengths greater than 50 feet.

•Gas piping may be copper tubing, type K or L; polyethylene plastic tube, with a minimum wall thickness of .062 inch; or standard weight (schedule 40) steel or wrought iron pipe.

•Copper tubing must be tin-lined if the gas contains more than 0.3 grams of hydrogen sulfide per 100 cubic feet of gas.

•Plastic tubing is suitable only for outdoor, underground use.

•Gas piping in contact with earth, or any other material which may corrode the piping, must be protected against corrosion in an approved manner.

•Underground piping must have a minimum of 18" cover.

TEST CONNECTIONS

All connections and joints must be thoroughly tested for leaks in accordance with local codes and all listed procedures in the latest edition of the National Fuel Gas Code: ANSI

Z 223.1/NFPA 54, or CAN/CGA-B149.1

mDANGER

Do not use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the area while you check for gas leaks. This will result in a fire or explosion which can cause serious bodily injury or death and damage to property.

www.weber.com®

Page 6 Page 8
Page 7
Image 7
Summit 89208 Gas Instructions, Install Gas Supply, General Specifications for Piping, GAS Line Piping, Test Connections
Page 6 Page 8

89208 specifications

Summit 89208 is an innovative solution designed to revolutionize industries ranging from logistics to data management. This product emphasizes efficiency, reliability, and cutting-edge technology to cater to the needs of modern businesses.

One of the standout features of Summit 89208 is its advanced data processing capability. Utilizing state-of-the-art algorithms, the system can process large volumes of data swiftly, enabling organizations to make informed decisions in real time. This feature is particularly useful in sectors like supply chain management, where timely data is crucial for optimizing operations and maximizing profits.

Summit 89208 is also equipped with a user-friendly interface, which simplifies the user experience. This design approach ensures that users, regardless of their technical proficiency, can navigate and utilize the system with ease. Customizable dashboards allow businesses to tailor the platform to their specific needs, providing an efficient way of managing resources and analyzing data.

Another significant characteristic of Summit 89208 is its integration capabilities. The system can seamlessly connect with existing software and hardware solutions, minimizing disruption during implementation. This compatibility allows organizations to build upon their current infrastructure while leveraging the enhanced features of Summit 89208.

Security is a top priority for any technology, and Summit 89208 excels in this area. With advanced encryption protocols and robust access controls, the system protects sensitive data from unauthorized access and potential breaches. This commitment to security ensures that businesses can operate confidently, knowing their information is safeguarded.

Furthermore, Summit 89208 employs machine learning technologies that enhance its functionality over time. As the system gathers more data, it becomes increasingly adept at predicting trends and identifying areas for improvement, ultimately contributing to operational excellence.

Lastly, the system is designed to be scalable, accommodating the growth of businesses without requiring extensive additional investments. Whether a small startup or a large corporation, users can adapt Summit 89208 to their evolving needs, ensuring longevity and sustained performance.

In summary, Summit 89208 stands out for its robust data processing capabilities, user-friendly design, seamless integration, strong security features, machine learning advancements, and scalability. These characteristics position it as a leading choice for businesses looking to enhance their operational efficiency and drive success in an increasingly competitive landscape.
Top Page Image Contents