Manuals / Summit / Outdoor Cooking / Gas Grill

Summit E/S-620/650 Refilling the Liquid Propane Cylinder, Checking the Fuel Level in Your Tank

Models: E/S-620/650

1 84
Download 84 pages 48.39 Kb
Page 14
Image 14

14

GAS INSTRUCTIONS

 

 

REFILLING THE LIQUID PROPANE CYLINDER

We recommend that you refill the LP cylinder before it is completely empty. Removal of the LP cylinder

1) Close cylinder valve (turn clockwise).

2) Unscrew regulator coupling by turning counterclockwise, by hand only.

3) Loosen cylinder lock wing nut and turn cylinder lock up out of the way.

4) Lift cylinder off.

To fill, take the LP cylinder to a gas propane dealer, or look up “gas-propane” in the phone book for other sources of LP gas.

WARNING: We recommend that your LP cylinder be filled at an authorized LP gas dealer, by a qualified attendant, who fills the cylinder by weight. IMPROPER FILLING IS DANGEROUS.

CAUTION: Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.

CHECKING THE FUEL LEVEL IN YOUR TANK

Check the fuel level by viewing the color indicator level line on the side of the tank scale.

1)Empty

2)Medium

3)Full

SAFE HANDLING TIPS FOR LIQUID PROPANE GAS CYLINDERS

•Liquid Propane (LP) gas is a petroleum product as are gasoline and natural gas. LP gas is a gas at regular temperatures and pressures. Under moderate pressure, inside a cylinder, LP gas is a liquid. As the pressure is released, the liquid readily vaporizes and becomes gas.

•LP gas has an odor similar to natural gas. You should be aware of this odor.

•LP gas is heavier than air. Leaking LP gas may collect in low areas and prevent dispersion.

•To fill, take the LP cylinder to a gas propane dealer, or look up “gas-propane” in the phone book for other sources of LP gas.

WARNING: We recommend that your LP cylinder be filled at an authorized LP gas dealer, by a qualified attendant, who fills the tank by weight. IMPROPER FILLING IS DANGEROUS.

•Air must be removed from a new LP cylinder before the initial filling. Your LP dealer is equipped to do this.

•The LP cylinder must be installed, transported and stored in an upright position. LP cylinders should not be dropped or handled roughly.

•Never store or transport the LP cylinder where temperatures can reach 125° F (too hot to hold by hand - for example: do not leave the LP cylinder in a car on a hot day).

Note: A refill will last about 18-20 hours of cooking time at normal use. The fuel scale will indicate the propane supply so you can refill before running out. You do not have to run out before you refill.

•Treat “empty” LP cylinders with the same care as when full. Even when the LP tank is empty of liquid there still may be gas pressure in the cylinder. Always close the cylinder valve before disconnecting.

CAUTION: Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.

•Do not use a damaged LP cylinder. Dented or rusty LP cylinders or LP cylinders with a damaged valve may be hazardous and should be replaced with a new one immediately.

WARNING: Replacement LP tanks must match the regulator connection supplied with this barbecue.

LIQUID PROPANE CYLINDER REQUIREMENTS

•Check to be sure cylinders have a D.O.T. certification (1), and date tested (2) is within five years. Your LP gas supplier can do this for you.

•All LP tank supply systems must include a collar to protect the cylinder valve.

•The LP cylinder must be a 20-lb. size approximately (18¼ inches high, 12¼ inches in diameter).

•The cylinder must be constructed and marked in accordance with the Specifications for LP - Gas Cylinders of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes or Transportation of Dangerous Goods; and Commission, as applicable.

IN CANADA

LIQUID PROPANE CYLINDER REQUIREMENTS

Note: Your retailer can help you match a replacement tank to your barbecue.

•The LP cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders, T.C.

1

DOT 4BA240

00/09

2

Liquid Propane (LP) Cylinder(s)

•The joint where the hose connects to the LP cylinder must be leak tested each time the LP cylinder is reconnected. For example, test each time the LP cylinder is refilled.

•Be sure the regulator is mounted with the small vent hole pointed downward so that it will not collect water. This vent should be free of dirt, grease, bugs etc.

•The gas connections supplied with your Weber® gas barbecue have been designed and tested to meet 100% CSA and ANSI requirements.

WWW.WEBER.COM®

Page 13 Page 15
Page 14
Image 14
Summit E/S-620/650 manual Refilling the Liquid Propane Cylinder, Checking the Fuel Level in Your Tank
Page 13 Page 15

E/S-620/650 specifications

The Summit E/S-620/650 is a state-of-the-art electronic device, specifically designed to cater to professionals and enthusiasts alike. This versatile tool is engineered with a set of cutting-edge features and technologies that elevate its functionality and user experience.

One of the standout characteristics of the Summit E/S-620/650 is its robust performance. Powered by a high-efficiency processor, it ensures rapid data processing and seamless multitasking. This makes it ideal for demanding applications, whether used for complex calculations, data analysis, or real-time monitoring. Users can expect an ultra-responsive interface that drastically reduces lag and boosts productivity.

In terms of connectivity, the Summit E/S-620/650 excels. Equipped with multiple ports, including USB-C and HDMI, it facilitates easy connection to peripheral devices, displays, and external storage solutions. It also offers robust wireless options, such as Wi-Fi 6 and Bluetooth 5.0, ensuring quick and reliable access to networks and devices without the hassle of cords.

The display on the Summit E/S-620/650 is another significant selling point. Featuring a high-resolution screen with vibrant color accuracy and excellent viewing angles, it provides an immersive visual experience. This is particularly advantageous for tasks that require attention to detail, such as graphic design or data visualization.

Durability is also a core characteristic of the Summit E/S-620/650. Constructed with premium materials, it is designed to withstand the rigors of daily use. The device is both lightweight and portable, making it easy to carry around for professionals who are often on the move.

In terms of energy efficiency, the Summit E/S-620/650 does not disappoint. Its advanced power management technology ensures optimal battery life, allowing users to stay productive longer without the need for constant recharging. This is particularly beneficial for those who work in field environments or do not have regular access to power outlets.

Lastly, user experience is prioritized with an intuitive operating system that supports a variety of applications. Whether for personal use or professional tasks, the Summit E/S-620/650 provides an adaptable platform to meet diverse needs. Overall, this device combines power, portability, and practicality, making it a top choice for today's users looking for reliability and performance in their electronic tools.