26

OPERATING INSTRUCTIONS

 

 

MANUALLY LIGHTING THE ROTISSERIE BURNER

ATTENTION: READ BEFORE

LIGHTING ROTISSERIE BURNER

After a period of non-use, before lighting the Rotisserie Burner, a few seconds must pass for the gas supply line to fill. When holding a match to the rotisserie burner you will see a flash of flames moving from left to right across the Rotisserie Burner surface, the Rotisserie Burner is not lit until the entire ceramic surface is aflame. At this point, start a count of 20 seconds before releasing the Rotisserie Burner control knob. The Rotisserie Burner surface will glow red once the burner is fully ignited.

DANGER

Failure to open the lid while igniting the grill, or not waiting 5 minutes to allow the gas to clear if the grill does not light, may result in an explosive flare-up which can cause serious bodily injury or death.

CAUTION: The Rotisserie Burner flame may be difficult to see on a sunny day.

WARNING: Check hose before each use of grill for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the grill. Replace using only a Weber® authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site.

Log onto www.weber.com®.

1)Open the lid.

2)Remove the warming rack and the cooking grates from the cookbox.

3)Make sure all burner control knobs are turned off. (Push control knob down and turn clockwise to ensure that it is in the “OFF” position.)

WARNING: The burner control knobs must be in the “OFF” position before turning on the liquid propane cylinder tank valve. If they are not in the “OFF” position, when you turn on the LP cylinder valve, the "excess gas flow control" feature will activate, limiting the flow of gas from the LP cylinder. If this should occur, turn off the LP cylinder valve and burner control knobs. Then start over.

DANGER

When the "excess gas flow control" feature is activated, a small amount of gas is still flowing to the burners. After turning off the cylinder and burner control knobs, wait at least 5 minutes for the gas to clear before attempting to light the grill. Failure to do so may result in an explosive flare-up, which can cause serious bodily injury or death.

E/S-650

*The grill illustrated may have slight differences than the model purchased.

4)Turn the cylinder on by turning the cylinder valve counterclockwise.

5)Put a match in the match holder and strike the match.

6)Hold match holder and lit match by right side of rotisserie burner.

WARNING: Do not lean over the open grill.

7)Push rotisserie burner control knob down and turn to “START/HI”. Continue to hold the control knob down until twenty (20) seconds after the burner has ignited.

8)Check that the burner is lit by looking for the rotisserie burner to glow red.

WARNING: If the rotisserie burner does not light, turn the burner control knob to “OFF” and wait 5 minutes to let the gas clear before you try again.

Note: When using the rotisserie with the lid closed, only light two of the main burners under the food (See Grilling Methods-Indirect Cooking). Check your food periodically to prevent over cooking on the outside. Turn off the rotisserie burner once the food has browned to the desired color. Finish cooking on indirect heat.

TO EXTINGUISH

Push in and turn each burner control knob clockwise to “OFF” position. Turn gas supply off at the source.

WWW.WEBER.COM®

Page 25 Page 27
Page 26
Image 26
Summit E/S-620/650 manual Operating Instructions
Page 25 Page 27

E/S-620/650 specifications

The Summit E/S-620/650 is a state-of-the-art electronic device, specifically designed to cater to professionals and enthusiasts alike. This versatile tool is engineered with a set of cutting-edge features and technologies that elevate its functionality and user experience.

One of the standout characteristics of the Summit E/S-620/650 is its robust performance. Powered by a high-efficiency processor, it ensures rapid data processing and seamless multitasking. This makes it ideal for demanding applications, whether used for complex calculations, data analysis, or real-time monitoring. Users can expect an ultra-responsive interface that drastically reduces lag and boosts productivity.

In terms of connectivity, the Summit E/S-620/650 excels. Equipped with multiple ports, including USB-C and HDMI, it facilitates easy connection to peripheral devices, displays, and external storage solutions. It also offers robust wireless options, such as Wi-Fi 6 and Bluetooth 5.0, ensuring quick and reliable access to networks and devices without the hassle of cords.

The display on the Summit E/S-620/650 is another significant selling point. Featuring a high-resolution screen with vibrant color accuracy and excellent viewing angles, it provides an immersive visual experience. This is particularly advantageous for tasks that require attention to detail, such as graphic design or data visualization.

Durability is also a core characteristic of the Summit E/S-620/650. Constructed with premium materials, it is designed to withstand the rigors of daily use. The device is both lightweight and portable, making it easy to carry around for professionals who are often on the move.

In terms of energy efficiency, the Summit E/S-620/650 does not disappoint. Its advanced power management technology ensures optimal battery life, allowing users to stay productive longer without the need for constant recharging. This is particularly beneficial for those who work in field environments or do not have regular access to power outlets.

Lastly, user experience is prioritized with an intuitive operating system that supports a variety of applications. Whether for personal use or professional tasks, the Summit E/S-620/650 provides an adaptable platform to meet diverse needs. Overall, this device combines power, portability, and practicality, making it a top choice for today's users looking for reliability and performance in their electronic tools.
Top Page Image Contents