Care and Maintenance
Cleaning Your Refrigerator:
1.Unplug the unit and remove the food, shelves and crisper.
2.Wash the inside surfaces with a solution of warm water and baking soda. The solution should contain about 2 tablespoons of baking soda to a quart of water. Rinse and dry thoroughly with a clean soft cloth.
3.Wash the shelves and crisper with a mild detergent solution. Rinse and dry.
4.Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.
5.Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any electrical parts.
CAUTION: Failure to unplug the unit could result in electrical shock or personal injury. Never use acids, chemical thinners, gasoline, benzene or hot water for cleaning any part of the
Cleaning the Evaporation Tray:
The evaporation tray is set at the back of the refrigerator- freezer, just above the compressor. Since dust and grime accumulating on this tray will decrease the evaporation efficiency, it should be cleaned every six months or so.
To remove the evaporation tray, unscrew it and slide it out. Clean it as you would any other plastic part. Once
the tray is clean, reposition it over the compressor, making sure that it is level and attached properly.
Power Failure:
Most power failures are corrected within a few hours and should not affect the temperature of your unit if you minimize the number of times the doors are opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your food.
Vacation Time:
Short vacations: Leave the appliance operating during vacations of less than three weeks.
Long vacations: If the unit will not be used for several months, remove all food and unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the doors open slightly, blocking them open if necessary.
10
