Summit FF1152SS Operating Your Refrigerator, Setting the Temperature Controls, Freezer

Models: FF1152SS

1 14
Download 14 pages 12.99 Kb
Page 9
Image 9
Operating Your Refrigerator

Operating Your Refrigerator

Setting the Temperature Controls:

Your unit has one control for regulating the temperature in the refrigerator compartment and a separate one for the freezer.

Refrigerator:

The refrigerator compartment's temperature control (thermostat) is a dial type located at the top center of the compartment.

TURN KNOB

BOTTOM VIEW

KNOB

When you turn the unit on for the first time, set the control to its coldest setting, which is MAX.

Setting the Temperature Controls: After several hours, adjust the temperature control to the setting that best suits your needs. The setting MED should be appropriate for most uses.

Freezer:

WARM ——————— MED ———————— COLD

FREEZER TEMP. CONTROL

The temperature control for the freezer is a slide switch located on the back wall of the compartment. It has settings of WARM, MED and COLD. When first turning on the unit, set this switch to COLD, then after a few hours, slide it back to MED.

NOTES:

1.To completely turn off the unit, disconnect the power.

2.If the unit is unplugged, has lost power, or is turned off, you must wait 3 to 5 minutes before restarting it. If you attempt to restart before this time delay, the unit will not start.

Frost-Free Defrost System:

It is not necessary for you to defrost either the refrigerator or the freezer compartment of this appliance. While the compressor is operating, ice may build up along the cold rear wall of the refrigerator compartment (the evaporator is

8

Page 9
Image 9
Summit FF1152SS Operating Your Refrigerator, Setting the Temperature Controls, Freezer, Frost-Free Defrost System