Summit FFBF285SS user manual Cleaning the accessories, Replacing the interior light bulb

Cleaning the accessories

Door shelves:

Remove all food from the door shelves.

Lift the cover of the shelf upwards and pull it off sideways.

Remove the bottom of the door shelf by pushing it upwards.

Water-collecting pan:

Make sure that the pan at the back of the appliance is always clean.

1.Gently release the snap of the pan from the compressor by pushing it using a tool (like a screwdriver), so that the pan can be removed.

2.Lift the pan, clean it and wipe it dry.

3.Re-assemble in reverse order.

Crisper or drawers:

To clean a drawer, pull it out as far as possible, tilt it upwards and then pull it out completely.

Door Gaskets:

Clean door gaskets every three months using a baking soda solution as described above. Gaskets must be kept clean and pliable to ensure a proper seal.

Petroleum jelly applied lightly on the hinge side of gaskets will keep the gaskets pliable and ensure a good seal.

Replacing the interior light bulb

If the interior light should fail to work, proceed as follows (see figures on next page):

1.Switch off the appliance and pull out the plug. You may also find it helpful to remove shelves for easier access.

2.Use a flathead screwdriver to remove the cover of the light bulb.

3.First check that the bulb hasn’t worked loose by ensuring it is screwed securely in the socket. Replace the plug and switch on. If the bulb works, replace the light cover by inserting the rear lug and pushing up to locate the two front lugs.

4.If the light still fails to work, switch off the unit and pull out the plug. Replace the bulb with a new 15-watt (max) appliance plug of the same type.

5.Carefully dispose of the burnt-out bulb.

Replacement bulbs should be available at most hardware stores and home improvement centers.

13