Summit FFBF285SS user manual Electrical requirements, Reversing the door swing

The appliance should be located on a smooth surface. The two leveling legs at the front corners of the appliance can be adjusted as required.

Leveling legs can be adjusted by turning them counter-clockwise to raise the refrigerator or clockwise to lower it. Correct adjustment of the feet avoids excessive vibration and noise.

Electrical requirements

!WARNING! This appliance must be grounded!

Make sure there is a suitable power outlet (115V AC, 60Hz, 15 amps) with proper grounding to power the refrigerator-freezer.

The electrical safety of the appliance is only assured when the grounding system in the house is installed in accordance with regulations.

When positioning the appliance, do not let the power cable get stuck under it; otherwise, the cable will be damaged.

Ensure that the plug remains easily accessible. Do not use a multiple adapter bar or an extension cord.

Avoid the use of three-to-two prong adapters or cutting off the third grounding prong in order to accommodate a two-prong outlet. This is a dangerous practice since it provides no effective grounding for the refrigerator and may result in shock hazard.

Reversing the door swing

This appliance allows you to reverse the door opening from left to right and back. You can select your preference of door opening by following this procedure to make the change.

1.Disconnect the appliance from the power supply.

2.Remove all food, loose items and fittings from the appliance and door shelves.

3.Unscrew the bolts and remove the middle hinge while holding the doors. (1)

4.Remove the fresh food (refrigerator) compartment door from the top hinge by sliding down and pulling forward. (2)

5.Remove the freezer compartment door by pulling up. (3)

6.Remove the plastic covers on the front top trim. (4)

7.Unscrew the bolts of the top hinge and remove top hinge. (5)

8.Reposition plugs on the opposite side. (6)

9.Remove the front bottom trim. (7)

10.Carefully lay the appliance on its back. (8) (Get someone to help you.)

11.Unscrew and remove the left-hand side front feet. (9)

12.Unscrew and remove the bottom hinge. (10)

6