PLACING AND INSTALLATION
It is important to make sure the appliance is leveled evenly to prevent falling.
Two spacers attached to the appliance must be fitted onto the upper edge of the condenser, thus preventing the appliance from being installed too close to the wall. Spacers are manufactured for
Connection to Power Supply
Connect the appliance with the cable and plug to the power supply socket outlet with a ground terminal (safety socket).
“DO NOT USE AN EXTENSION CORD.”
Required nominal voltage and frequency are indicated on the rating plate.
The connection to the power supply and grounding has to be made according to current standards and regulations. The appliance resists temporary voltage tolerance up to
Operation Control
The freezer is controlled with a thermostat knob located in the upper right hand corner of your refrigerator.
Temperature Selection
Higher settings on the knob (towards 7) mean colder temperatures in all compartments of the appliance. The temperature in the interior of the appliance may even drop below 32°F. Use the higher thermostat setting only when required or recommended. We recommend that you set your thermostat in the middle for standard temperature.
Changing the thermostat will affect the temperature inside of the appliance; therefore choose your temperature wisely.
When the thermostat is on the STOP (0) position the appliance does not operate.
Temperature in the freezer also depends on how often you open the door.
Instructions for Use
