Sumo SL001 manual Charger Operation

LED Power Indicator

Holes for Balance

Points

Wheel Slots

Charger Operation

A full charge yields approximately 5-6 minutes of robot action. . A low battery is indicated when the robot’s second and fourth LED blink rapidly.

1. Before charging, ensure the robot is switched off.

2. Place the robot on the charger. The front of the robot aligns with the front of the charger.

3. Ensure two power connectors, two wheel slots and the bal- ance point connections align properly. All connections fit together one way; do not force.

4. A red LED on the charger illuminates for about 21⁄2 minutes while the robot is charging. When charging is complete, the light turns off.

Charging Connections

Wheel Slots

15