Sun Microsystems 2005Q2 quick start Cleaning Up, To Uninstall Completely, HttpSession

■Stand-alone Application Server installations:

install-dir/nodeagents/nodeagent_name/i1/logs /access/server_access_log

install-dir/nodeagents/nodeagent_name/i2/logs /access/server_access_log

5.Add a name and value pair (Name=Name Value=Duke) for storing in

HttpSession.

6.Click the “Add to Session Data” button.

7.Verify that the session data was added

Next Steps In this section you created an instance to use as a load balancer and set up a load balancing configuration. You also verified load balancing.

To configure and verify HTTP session failover, continue to Chapter 2. Otherwise continue on to “Cleaning Up” on page 22.

Cleaning Up

To clean up, you can uninstall the Application Server installation by completing the steps in “To Uninstall Completely” on page 22, or you can simply delete the sample cluster you have just created by completing the steps in “To Remove the Sample Cluster Only” on page 23.

Caution – If you plan to complete Chapter 2 do not use these clean-up procedures. Instead, go to Chapter 2 now and when you are done use the procedures you’ll find there to clean up.

▼To Uninstall Completely

To completely uninstall Application Server and also uninstall the Web Server, use the following procedure.

Steps 1. Stop the Application Server processes using these commands:

asadmin stop-cluster FirstCluster

asadmin stop-node-agent hostname

asadmin stop-domain domain1

22Sun Java System Application Server Enterprise Edition 8.1 2005Q2 Quick Start Guide