![](/images/new-backgrounds/1174802/17480235x1.webp)
7. Place the empty system chassis front side down (FIGURE 7).
Rear chassis
Front chassis
FIGURE 7 Orientation of Empty System Chassis
Replacing the Centerplane
The system chassis is in two sections consisting of a front chassis and a rear chassis. The centerplane is located between the two sections of the chassis and is fastened to the front chassis.
Caution
1.Remove the 26 screws that surround the center seam of the system chassis.
2.Lift and remove the rear chassis section and set it aside (FIGURE 8).