5-1
NetworkLinkups/Speed Selection 5
The information presented in this chapter is applicable to both Solaris 1.x and
2.x software versions.

5.1 Network Link Ups

5.1.1 10/100Mbps Link Up Using RJ45 Connector

If your SunFastEthernet channel is connected to a 10 or 100Mbps network
through the RJ45 connector you will receive a Link Up message whenever you
boot the system or disconnect and then reconnect to the network.
For 10Mbps the message is:
For 100Mbps the message is:
# be<num>: Using Onboard Transceiver
10 Mbits/sec Link Up
# be<num>: Using Onboard Transceiver
100 Mbits/sec Link Up