Sun Microsystems manual 4. 安裝 Sun XVR-100 軟體。請鍵入下列指令：, # ./install, 在此範例中，將顯示下列內容：

4.安裝 Sun XVR-100軟體。請鍵入下列指令：

#./install

在此範例中，將顯示下列內容：

Installing SUNWpfbx.u SUNWpfbcf SUNWpfbw SUNWpfbmn for Solaris 8 ...

Installing required patch 114537-34 ...

*** Installation complete.

To remove this software, use the íremoveí script on this CDROM, or the following script:

/var/tmp/xvr-100.remove

A log of this installation can be found at: /var/tmp/xvr-100.install.2005.02.10

To configure a Sun XVR-100 graphics accelerator, use the fbconfig utility.See the fbconfig(1m) and SUNWpfb_config(1m) manual pages for more details.

*** IMPORTANT NOTE! ***

This system must be rebooted for the new software to take effect. Reboot this system as soon as possible using the shutdown command and the íboot -rí PROM command (see the shutdown(1M) and boot(1M) manual

pages for more details).

如果之前已安裝相關軟體，則會顯示下列內容：

The version is the same on the system.Packages not installed. All required software is already on the system.

您可以使用下列指令檢查系統中是否已安裝 Sun XVR-100繪圖加速器。請鍵入下列 指令：

# /usr/bin/pkginfo grep pfb

第 2 章 安裝 Sun XVR-100繪圖加速器硬體與軟體 11