TO CLEAN PRE-FILTER
Slide out
REPLACEMENT OF HEPA FILTER
After about 12 months of collecting dirt, dust, pollen and other pollutants, the HEPA Filter of your unit will need to be replaced. The HEPA Filter cannot be cleaned. Use the enclosed reorder form to order replacement filters if not available from your retailer.
Remove the
TO REPLACE HEPA FILTER ASSEMBLY
NOTE: Use directions on the top of the HEPA Filter Assembly for proper placement of the filters into the assembly and for replacing the as- sembly into the unit.
Using the handle, slide the HEPA Filter Assembly back into the cabinet. Aluminum
TO REPLACE CABINET TOP
Replace the cabinet top by positioning over the unit and placing on cabinet. (Figure 8) Be sure that the plas- tic ball and socket are engaged.
Plug the cord into the electrical power source and select desired speed.
REPLACEMENT | OF CHARCOAL FILTER |
| |
ACTIVATED CHARCOAL FILTER HELPS REMOVE |
| ||
HOUSEHOLD ODORS. |
|
| |
To remove the | Charcoal | Filter, remove the Sealing |
|
Label from top of Filter Assembly and place aside so it |
| ||
can be reused. Remove the Charcoal Filter from the | Figure 8 | ||
Filter Assembly. Do not wash the Charcoal Filter. It | |||
should be replaced every |
| ||
conditions. These filters | are available in your retail |
| |
store or use the | enclosed | order form. |
|
After replacing the Charcoal Filter, return the Filter Assembly back into the cabinet. Reseal the top of the Filter Assembly with the Sealing Label removed pre- viously.
PLASTIC
BALL 8 SOCKET