USING YOUR COFFEE MAKERÕS CONTROLS
CustomBlend™ Knob – This switch controls the brew strength of coffee before the coffee maker is turned on to suit your personal preference – mild, regular or strong.
Power Switch – Switch controls power to the coffee maker. (Programmable Units Only)
On Light – This light indicates that power is going to the coffee maker, and the coffee maker is in normal operating stage.
Clock/Timer Digital Display – The display shows clock with AM/PM indicator. When the “BREW” button is pressed, the programmed brew time is displayed.
Hour – This button advances the hour display for the clock timer. See the section on “How to set the Clock” for proper use.
Minute – This button advances the minute display for the clock and timer. See the section on “How to set the Clock” for proper use.
Brew – This button allows you to program the coffee maker up to 24 hours before the desired brewing time. See the section on “Delaying the Brewing Cycle” for proper use.
PM Indicator – This light is illuminated when the clock or “Brew” set time is indicating PM. Auto Indicator – This light is illuminated when the unit is in the delayed brewing cycle mode. Power Switch – This switch controls three power modes: ON/OFF/AUTO. The “OFF” mode does not have a light indicator.
USING YOUR COFFEE MAKER'S CONTROLS
(Programmable Units Only)
PM
Auto Off On
Auto
CustomBlend
Hour Min Brew
To preset your coffee maker to brew at a later time first verify that the clock is set to the correct time. See section on “How to Set the Clock”. The clock must be set before unit is operational.
Press and hold the “Brew” Button. While continuing to hold the “Brew” Button, press the “Hour” Button until the desired brew time hour is reached. Then press the “Minute” Button until the desired minute has been reached. Release the “Brew” Button.
Turn the Power Select switch to the “AUTO” position. The “AUTO” light will illuminate, indicating that the coffee maker is waiting for the preset brew time to be reached before it will begin the brewing cycle.
USING YOUR COFFEE MAKERÕS CONTROLS
(Auto-Off Units Only)
Automatic Shut-Off
OnOff
CustomBlend
HOW TO SET THE CLOCK
To set the correct time of day, first press the “Hour” Button until the correct hour has been reached. Then, press the “Minute” Button until the correct minutes have been reached. Use the AM/PM indicator on the left side of the digital read out when setting the time.
NOTE: Unplugging the unit will reset
the clock to 12:00.
On Button – This button turns the unit “ON”. The light indicates when the unit is energized. After 2 hours the unit will turn itself off. To restart simply turn the unit “Off” then “On” again.
OFF Button – This button turns the coffee maker “OFF”. The button doesn’t have a light indicator.
6
