to Off.
MAINTAINING YOUR STEAM MASTER®
IRON
CLEANING THE SOLEPLATE
Clean the soleplate if starch or other residue accumulate.
To clean the Soleplate:
1. Allow the iron to cool and then wipe it with asoft, damp cloth.
WARNING:
DO NOT use abrasive cleansers, scouring pads or vinegar to clean the soleplate.
This will damage the finish.
2. Run the iron over an all-cotton cloth to remove any residue.
USING THE SELF-CLEANING FEATURE
You should use the Self-Cleaning feature once a month to maintainthe optimal performance
of youriron.
To use the Self-Cleaning feature:
1. Move the Steam Lever back and forth from
O
/Off (Dry) several times to remove debris
and minerals from the Steam Valve. This keeps water flowing into the steam chamber.
MAINTENANCE
CLEANING THE ANTI-CALCIUM SYSTEM
The STEAM MASTER
®
iron houses an anti-calcium filter in the reservoir, whicheliminates
impurities from the water.
To prolong the efficiency of this filter:
1. Unplug the iron and allow it to cool.
2. Locate the water cup that accompanied the iron. Fill it with water to the Sunbeam logo
in thetop right corner. Add 1 teaspoon of salt to the water and fill the water reservoir
with this solution.
3. Leave the solution in the water reservoir for 15minutes, then empty it.
4. Fill the water reservoir a second time with the salt water solution and empty it again
after 15 minutes.
5. Fill the tank with fresh water to rinse and empty.
The Anti-Calcium System should be cleaned approximately once a month.
.
(select models only)