Sunbeam 4817-8 Cleaning, Storing and Caring for Your Oskar

10
Cleaning, Storing and Caring for Your Oskar
®
Food Processor
When you have finished processing, unplug the OSKAR®Food Processor from the
electrical outlet and remove the cover, slicing/shredding disc or cutting/processing blade
and the container from the motor base.
Wipe the base of your unit a damp cloth, then polish it lightly with a dry one.
NEVER IMMERSE THE MOTOR BASE IN ANY LIQUID.
The processing container, covers, cutting/processing blade, slicing/shredding disc,
ejector disc and food pusher are all dishwasher safe. These parts may be cleaned
on the top rack of a dishwasher.
REMEMBER TO USE EXTREME CAUTION WHEN HANDLING THE
CUTTING/PROCESSING BLADE AND SLICING/SHREDDING DISC.
THEY ARE VERY SHARP!
Cleaning the internal shaft of your cutting/processing blade is most important.
We suggest the use of a small percolator or baby bottle brush to remove any food
particles, then wash and dry the shaft thoroughly.
Sunbeam suggests that you store the OSKAR®Food Processor on a dry counter or table
top in your kitchen, where it will always be ready for immediate use. Store the
cutting/processing blade in the clear container. Store the slicing/shredding disc in a safe
location (OUT OF THE REACH OF CHILDREN). The OSKAR®blades are EXTREMELY
sharp! Use caution when handling the blades.
After washing and drying the Container, you may wish to apply a small amount of
vegetable oil to the rim of the Cover and Container. This lubrication allows the cover
to move freely when in contact with the Container.
ALWAYS STORE DISCAND BLADE OUT OF THE REACH OF CHILDREN!
A Few Things To Remember:
1. Use the OSKAR®Food Processor only on a dry, level surface – never outdoors,
on a damp surface or on a table edge.
2. Never remove the Cover or the Processor until the Blade or Disc has come
to a complete stop and the unit has been unplugged from an electrical outlet.
3. The motor of your OSKAR®Food Processor has been permanently lubricated at the
factory and requires no further attention. Other than recommended cleaning,
no further user maintenance should be necessary. Return your Food Processor
to the nearest Sunbeam authorized independent service center if servicing or repairs
become necessary.