4.Prior to making a second pot of coffee, turn the coffeemaker off. This will reset the FRESH BREW™ TIMER feature. To turn the coffeemaker off, press the SELECT button until all lights turn off.
5.Make sure the decanter is empty before starting to brew coffee.
6.Be sure to turn your coffeemaker off when no longer using it.
The Fresh Brew™ Timer Feature
The FRESH BREW™ TIMER feature lets you know how long your coffee has been waiting for you. At the start of the brew cycle, the FRESH BREW™ TIMER feature will automatically be activated and the clock display will change to show the time since brewing began. Incremental segments of the FRESH BREW™ TIMER feature will start to darken as an indication of how long the coffee has been waiting for you.
Press the FRESH BREW™ TIMER button once (Figure 8) to go back to the clock function (while on the clock mode, the FRESH BREW™ TIMER feature will keep counting). The display will automatically change back to the clock after 2 hours or when the unit is turned off.
NOTE: The BREW NOW green light must be on for the FRESH BREW™ TIMER feature to operate. The time and delay brew time cannot be set when the fresh brew time is displayed.
On/Off Audible Ready Signal
The coffeemaker will beep three times at the end of the brew or clean cycle. You may choose not to be alerted by turning the audible ready signal off (Figure 9).
BREWING COFFEE LATER
1. | You must first set the time for when you would |
| like the coffeemaker to begin brewing your |
| coffee as described in Setting the Clock and |
| the Delay Brew Timer section. |
2. | Prepare your coffeemaker as described in |
| Adding Water and Ground Coffee section. |
3. | To activate DELAY BREW and program your |
| coffeemaker to brew coffee at a later time, press |
| the SELECT button twice (Figure 10). The yellow |
| DELAY BREW light will turn on. The coffeemaker is |
| now set to automatically brew coffee at the |
| |
| light will turn on. You can select the strength that |
| you desire by pressing the BREW STRENGTH button. |
4. | At the |
| will turn on and the DELAY BREW yellow light will |
| turn off, indicating the brewing has started in the |
| selected brew strength. The FRESH BREW™ TIMER |
| feature will start. |
5. | The coffeemaker warmer plate will keep your coffee |
| hot for 2 hours and then automatically turn off. Thermal |
FIGURE 8 | models will turn off at the end of the brew cycle. |
As a safety feature, your coffeemaker will NOT start again automatically the next day. If you want your coffee to brew at the same time the following day, simply add a new filter, coffee and water and set DELAY BREW, by repeating Steps 2 and 3 above.
To cancel DELAY BREW:
Press the SELECT button until all lights turn off (Figure 10).
FIGURE 9
FIGURE 10
14 | 15 |
