Sunbeam JE4700 manual Assembling your Sunbeam Pure Juice, Before Use, To assemble your Pure Juice

Assembling your Sunbeam Pure Juice.

Before Use:

After unpacking your Pure Juice, we recommend that you dissemble the unit before using for the first time. Wash all parts except the Motor Base in hot soapy water. Rinse and dry immediately.

Important:

Always ensure your Pure Juice is unplugged from the power outlet when not in use, assembling or removing parts.

To assemble your Pure Juice

(See opposite)

1.Set up the Motor Base on a dry level surface with the On/Off switch facing the user.

2.Place the Juice Collector onto the Motor Base.

3.Position the stainless steel grating and filtering basket on to the drive shaft.

4.Place the Lid/Feed Tube on top of the Pure Juice and secure by clipping the two safety levers on the sides of the juicer into position.

Note: As an added safety feature the Pure Juice will not operate if the safety levers are not locked in place.

5.Position the Pulp container in place.

6.Plug the Pure Juice into the 230-240V power outlet and turn on Power. Position a glass or jug under the Juice outlet and commence juicing.

Continuous Flow

Pulp Container

Food Pusher

Lid/Feed Tube

Stainless steel

grating and

filtering basket

Juice

Collector / Outlet

Drive Shaft

Motor Base

On/Off Control

Button

Safety Lever

4