Operating your Sunbeam Pure Juice
Note: As an added safety feature the Pure Juice will not operate if the safety levers are not locked in place.
1.Ensure the switch on the Pure Juice is in the ‘Off’ position and plug the cord into a 230- 240V power outlet and turn the power on.
2.Clean fruits and vegetables thoroughly and remove any stems, large pits, stones and seeds. All fruits and vegetables should be cut into pieces to fit into Lid/Feed Tube.
3.Ensure that the Pure Juice has been assembled correctly, making sure that the stainless steel grating and filtering basket revolves properly before placing the ingredients in the Pure Juice. Refer to page 4 for assembly instructions.
4.Switch the Pure Juice to the ‘On’ position to start juicing. Place food into the Lid/ Feed Tube slowly and steadily, using the Food Pusher.
Note: Do not force the food into the grating and filtering basket as this can cause basket to shift and result in plastic shavings getting into the juice.
5.The Juice from the fruits or vegetables will flow directly into the glass or jug and the pulp will be separated and collected in the Pulp container.
Important: If juicing large amounts of fruits or vegetables, the pulp container will be filled, switch Pure Juice to the ‘Off’ position, unplug cord, and allow grating and filtering basket to stop completely. Empty Pulp container and reposition.
6.When juicing is complete ensure that the Pure Juice is switched ‘Off’ and unplugged from the power outlet.
5
