Assembling your Sunbeam Cafe Juice™
Before Use
After unpacking your Sunbeam Cafe Juice™, we recommend that you dissemble the unit before using for the first time. Wash all parts except the motor base in hot soapy water. Rinse and dry immediately.
Important: Always ensure your juicer is unplugged from the power outlet when not in use, during assembling or whilst removing parts.
1.Set the motor base on a dry, level surface. For convenience when juicing, have the control switch facing you – figure 1.
Figure 1
2.Place the juice collector / bowl onto the top of the motor base – figure 2.
Figure 2
3.Position the stainless steel blade and filtering basket onto the motor drive shaft and push down until firmly in
place, the arrows indicate the correct alignment position of the basket – figure 3.
Figure 3
4.Place the juicer cover onto the juice collector / bowl, with the feed chute positioned over the stainless steel blade and filtering basket and push into position
– figure 4.
Figure 4
7
