Assembling your Café Series™ Juice Extractor
Before Use
After unpacking your juicer, we recommend that you dissemble the unit before using for the first time. Wash all parts except the motor base in hot soapy water. Rinse and dry immediately.
Important: Always ensure your juicer is unplugged from the power outlet when not in use, during assembling or whilst removing parts.
1.Set the motor base on a dry, level surface. For convenience when juicing, have the control switch facing you – figure 1.
Figure 1
2.Place the juice collector/bowl onto the top of the motor base – figure 2.
Figure 2
3.Position the stainless steel blade and filtering basket onto the motor drive shaft and push down until firmly in place – figure 3.
Figure 3
4.Place the juicer cover onto the juice collector/bowl, with the feed chute positioned over the stainless steel blade and filtering basket and push into position
– figure 4.
Figure 4
7
