5
ASSEMBLINGYOUR BLENDER
CAUTION: Follow these important steps to assemble, tighten, and mount Blender container
quickly and correctly. INJURY MAY RESULT IF MOVING BLADES ARE EXPOSED.
TIGHTENING THE CONTAINER
A.To tighten container bottom, put assembled
container securely into motor base ring with
handle and lug in front of the rightstop.
B.Using container handle, turn container
tothe left as far as possible. This insures
that the container bottom is tightened
properly. Remove container from motor
baseand mount.
C.To operate Blender, place assembled
container in motor base ring with container
lug against flat side of the motor base stop.
Ifcontainer lug does not rest against flat side
of right stop, remove container assembly
andplace against flat side of left stop.
Seatcontainer firmly and operate.
D.To remove container, lift straight up.
(Ifit isnot easily removed, rock gently and
lift up, do not twist).If container bottom
cannot be loosened by hand, place
assembled container into motor base ring
with handle in front of left side stop.
Usinghandle, turn container to right
untilcontainer bottom loosens.
Do not attempt to place the container on or attempt to remove it from the motor base while
themotor is running.
ALWAYS HOLD CONTAINERWITH ONE HAND WHILE PROCESSING!
–1.50L–
–1.25L–
–1.00L–
–0.75L–
–0.50L–
–0.25L–
–4 –
–3 –
–2 –
–1 –
–5 –
–6 –