Sunbeam SGA9901 manual Installing The Turntable, Operation Instructions, Setting The Clock

Models: SGA9901

1 16
Download 16 pages 1.92 Kb
Page 7
Image 7
INSTALLING THE TURNTABLE

INSTALLING THE TURNTABLE

Never place the glass tray upside down.

The glass tray should never be restricted.

Both the glass tray and turntable ring assembly must always be used during cooking.

All food and containers of food should always be placed on the glass tray for cooking.

If the glass tray or turntable ring assembly cracks or breaks, contact 1-866-257-3336.

OPERATION INSTRUCTIONS

SETTING THE CLOCK

1.Touch CLOCK pad.

2.Use the number pads to enter the correct time.

3.Touch CLOCK pad again.

NOTE:

·This is a 12 hour clock. When the oven is first plugged in or when power resumes after a power interruption, the display will show ENTER CLOCK TIME. If you prefer to not have the clock displayed, touch RESET.

·You can check the clock time while cooking is in progress by touching the CLOCK pad.

SETTING THE TIMER

1.Touch TIMER.

2.Enter the amount of time by touching the number pads.

3.Touch START/STOP.

NOTE:

·Time countdown can be seen in display before clock or cooking time is returned to display. ·Touch TIMER and then touch RESET to cancel TIMER during timing process.

SETTING A COOKING PROGRAM

A.One-stage Cooking

1.Use the number pads to set a cooking time. You can set a cooking time from one second to 99 minutes and 99 seconds.

2.The default setting is 100% microwave power output. If you want to set a power level other than 100%, touch POWER, and then use the number pads to enter the power level.

3.Touch START/STOP to start cooking.

6

Page 7
Image 7
Sunbeam SGA9901 Installing The Turntable, Operation Instructions, Setting The Clock, Setting The Timer, A.One-stageCooking