Care and Cleaning

Cleaning with water

Ensure that the unit is unplugged before cleaning.

Press the two shaver head release buttons and pull the shaver from the casing Fig 1.

Figure 1

Rinse the cutter blocks under running water Fig 2.

Figure 2

Rinse the foil under running water Fig 3.

Figure 3

To improve cleaning it is recommended to use a little liquid soap.

After cleaning switch the shaver off

To protect the shaving foil, always replace the protective cap.

Cleaning without water

The shaver can also be cleaned without water.

Press the two shaver head release buttons and pull the shaver from the casing

Tap the shaver head on a flat surface or blow out the hairs thoroughly.

Never use the brush for cleaning the foil as this may damage it. Clean the cutter blocks with the enclosed cleaning brush.

5

Page 7
Image 7
Sunbeam SH3700 manual Care and Cleaning, Cleaning with water, Cleaning without water