Care and Cleaning continued
Changing the foil and cutter blocks
•Shaving performance depends on the condition of the foil and the cutter blocks. Both wear gradually in use. Therefore it is recommended that the shaving foil be changed once a year and the cutter blocks changed every two years.
Replacing the shaving foil
•Remove the shaver head by pressing the two release buttons.
•Pull the shaving foil out of the shaver head by holding it on the attached straps (fig. 4).
Figure 4
•Place the new shaving foil in the shaver head until it clicks in position.
•Replace the shaver head.
Replacing the cutter blocks
•Remove the shaver head
•Hold the cutter blocks on both sides and lift them from their supports (fig. 5).
Figure 5
•Place the new cutter blocks in position.
•Replace the shaver head.
Help Line
If you have any additional questions about using the Washable Shaver, please call the Sunbeam help line in Australia on 1800 025 059. In New Zealand, please call 0800 786 232.
6
