Using your Cafe Creamy™ Automatic Milk Frother (continued)
Note: Flashing control panel lights indicate the appliance is cooling down. Please wait approximately 4 minutes before restarting the appliance.
7.Follow cleaning instructions in the ‘Care and Cleaning Instructions’ section of this manual found on page 7, after use to ensure long life.
Preparing Cold Milk Beverages
1.Remove the milk jug from the power base.
2.Open the lid of the milk jug and insert the milk mixing attachment into the base of the milk jug.
3.Pour ice-cold milk into the milk jug, to a maximum of 250mL, the level that is marked with ‘M’ for max. See Figure 3.
Note: If you fill the milk jug above the maximum level, milk may be ejected during operation.
Note: The milk jug must also be filled above the minimum level, as indicated by ‘O’ symbol, to operate properly.
4.Add
5.Plug the power cord into a
Note: The appliance does not have an on/ off power button. Functions are activated through pressing feature buttons located on the control.
6.Press the 
mix cold milk button to begin the cold milk blending function. In approximately 3 minutes, the appliance will automatically switch off and you will be left with cold milk beverage in the milk jug. Pour into a glass filled with ice to keep cool.
Note: The blend cold milk button selected will remain illuminated during operation, and will turn off automatically when the milk blending and heating is complete.
7.Follow cleaning instructions in the ‘Care and Cleaning Instructions’ section of this manual found on page 7, after use to ensure long life.
6
