Sunbeam EM0180, SM8650 manual Care and Cleaning Instructions, Preparing for use

Care and Cleaning Instructions

Always disconnect the Cafe Creamy™ from the power outlet before cleaning any parts.

Note: Before cleaning after use, wait for the appliance to cool down.

Note: Do not immerse the power base in water or any other liquid, or allow moisture to come into contact with these parts.

See Figure 1.

Note: Do not place any part of the appliance in the dishwasher.

Preparing for use

Before using your Cafe Creamy™ Automatic Milk Frother for the first time, wash the milk jug and plastic lid in warm, soapy water.

Rinse and dry thoroughly. Repeat with the foam blender and milk mixing attachments located underneath the power base.

Cleaning the Milk Jug and Blending Attachment after use

After removing the milk jug from the power base and emptying its contents, wait for the milk jug to cool down. Then remove the blender attachment from the base of the milk jug. When cleaning the inside of the milk jug and blending attachment, hand-wash only using a sponge or a soft brush together with normal dish washing liquid. Be careful when cleaning the base of the milk jug where the heating element has contact, as it must not be scratched.

Cleaning the power base in case of spillage

If milk spills onto the power base, switch off the power outlet immediately and remove the plug. Using a damp cloth gently wipe spillage from power base. Ensure appliance is dry before plugging into power outlet.

Note: Do not use any solvents or abrasive agents for cleaning. Do not use and sharp or hard instruments such as steel wool for cleaning.

7