Using your Sunbeam Solus® Iron (continued)
Using the shot of steam
The shot of steam can be used when dry or steam ironing, when the temperature is set above the two dot (••) setting.
1.Ensure the tank is at least 1/4 full of water.
2.Select the desired temperature and wait until the temperature alert light illuminates green.
3.Squeeze the shot of steam trigger several times with the iron on the soleplate to prime the pump.
Note: If the tank has run dry, it may be necessary to
Using the spray mist
The spray mist can be used whether dry or steam ironing to
1.Ensure the tank is at least 1/4 full of water.
2.Press the spray button during ironing to release a fine mist from the spray nozzle.
The 3-Way safety auto-off feature
The safety
The iron will automatically shut off if left on the heel rest (vertical) for 15 minutes without being moved, or in the ironing position (horizontal) for 30 seconds, or if it is knocked onto its side (See figure 2).
Should you leave the iron unattended, the LCD screen and the red temperature alert light will flash, and a warning beep will sound to let you know that the
Power to the iron's heating element will be cut and the iron will start to cool. After 30 seconds the frequency of the beep alarm will decrease.
Once the iron is moved the power will reconnect. Allow the iron to heat until the temperature alert light illuminates green, and continue ironing as normal.
15 mins
30 seconds
Figure 2
7