Care and Cleaning
After each use
1.Turn the power off and remove the plug from the power outlet.
2.Allow the iron to cool before winding the cord around the
Storage
Always store the iron on its heel rest.
Do not store the iron with the soleplate facing down, or in the carton.
Cleaning
To clean the exterior of your iron, wipe over with a damp soft cloth and wipe dry.
Caution: Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior of your iron as these will damage the surface.
Cleaning the steam holes
To remove build up from the steam holes which may affect steam performance, use a cotton wool tip moistened in methylated spirits.
Cleaning the Resilium® soleplate
Wipe with a soft damp cloth and wipe dry.
Caution: Do not use scouring pads, abrasives or harsh cleaners to clean your Resilium®, soleplate, as these will scratch and damage the surface.
Troubleshooting
If the following conditions occur simultaneously, it indicates a possible fault within the thermistor. These conditions will persist until the soleplate thermistor is working correctly.
•The temperature alert light flashes red continuously, and
•The LCD backlight remains lit, and
•The temperature cannot be changed from the MAX setting, and the circular graphic flashes and counts up to the MAX segment continuously.
To reset the iron, simply switch it off at the power outlet, switch it back on again and wait 15 seconds. The iron should now operate normally. If the fault occurs regularly return the iron, along with your purchase receipt, to the place of purchase for a replacement or refund.
Note: the fault conditions described above are different to what occurs when the safety
8
