7
Using your BRITA Water Filter & Chiller continued
Filtering time
Please note that on average it will take 5½
minutes to filter 1 litre of water through the
BRITA® Maxtra cartridge.
Using the Memo function
It is important to change your filter cartridge
regularly to enjoy the benefits of filtered water.
The BRITA Memo system automatically
reminds you when your filter cartridge needs
to be changed.
When you have fitted and prepared your filter
cartridge, start the Memo system as follows:
• Press and hold the Start button until 4
bars appear on the display and flash twice.
The Memo is now set. The flashing dot in
the corner of the display indicates that the
Memo is working. See figure 2.
• After flushing the filter, the water will need
to chill. When switched on, a blue power
on LED will be illuminated to show that
the appliance is switched on and working.
When the water has been chilled the light
will appear white.
• On first use the appliance should be left
overnight to chill. On subsequent uses, it
will take approximately 90 minutes to chill
the contents of the chilling reservoir.
• The light may flicker between blue and
white as water is dispensed and if the
ambient temperature increases. The fan
may also be activated in these conditions
and will remain so until the required
temperature has been reached.
• At the end of every two weeks, one
bar will disappear to indicate the
remaining cartridge life. When only one
bar is showing, check that you have a
replacement BRITA Maxtra water filter
cartridge available. See figure 3.
�
���
��
��
��
Figure 2
�
���
��
��
��
Figure 3