Care and Cleaning
•Do not use harsh detergents or abrasive cleaners.
•Do not place any part of this appliance in a dishwasher.
•Wipe the base with a clean cloth or paper towel.
•Wash the filtering tank in warm, soapy water using a mild detergent.
•Wipe the inside of the filtered water tank with a damp cloth which has been soaked in water.
•Do not immerse the base in water or any other liquid.
•If the unit is to be moved or stored for a prolonged period of time without being used, we recommend that you drain the internal tank of any water. Flush the unit as described before using again.
Emptying the internal tank
•Switch off the appliance and unplug from the mains.
•Remove the lid and the filtering thank and any water in the filtered water tank.
•Turn the appliance upside down to reveal a drain plug located in the centre of the base.
•Using a $2 coin or a suitable screw driver, turn the plug anti clockwise until it is fully loosened. Please note that it cannot be completely removed.
•Drain the tank.
•Insert the plug after draining and using a $2 coin or suitable screwdriver, turn it clockwise until it stops.
•Do not over tighten as this may damage the plug.
Help Line
If you have any additional questions about using the Water Filter & Chiller, please call the Sunbeam help line in Australia on 1300 881 861. In New Zealand, please call 0800 786 232.
For BRITA® filter cartridge and Memo enquiries, contact BRITA® Customer Care. In Australia please call 1300 557 762. In New Zealand, please call 0800 427 482.
10
