(We recommend washing your warming blanket before initial use.)

Before washing or storing your warming product:
IF YOU DO NOT FOLLOW THIS SEQUENCE THE WARMING PRODUCT WILL NOT WORK.
1Disconnect power cord from wall before detaching control from warming
product.
2Disconnect the power cord from the module.
3Carefully follow all washing instructions of your warming product to avoid
shrinkage or possible damage.
DO NOT
DO NOTdry clean your blanket/mattress pad. Dry cleaning solvents may
damage the warming element.
DO NOTuse bleach or cleaning fluids.
DO NOTuse a wringer.
DO NOT iron the blanket/mattress pad.
DO NOT use mothballs or sprays of any kind.
DO NOTturn the blanket/mattress pad on until it is completely dry.
Taking care of your warming product is easy and safe as long as you follow a few
simple steps.
Machine Washing
1Presoak the blanket/mattress pad for 15 minutes in mild soap
and lukewarm water.
2Wash in mild soap and lukewarm water on the delicate or gentle cycle in the
washer for two minutes. Remember, do not use bleach.
3Rinse in fresh, lukewarm water.
4Spin dry in the washing machine. Then gently stretch to its original size.
Machine Drying
Caution:Do not use commercial dryers or the dryers at your local laundromat. They
get too hot and would damage the wiring of the warming product.
1Preheat the dryer on the low temperature setting for 2 minutes.
2Place blanket/mattress pad into the dryer and tumble dry for
10 minutes at a low temperature.
3Remove the blanket/mattress pad while it is still damp and
gently stretch it to its original size.
4Continue to air dry over a clothesline or a shower rod. DO NOT use clothespins.
5Warming product must be completely dry before using.
Hand Washing
1Presoak the blanket/mattress pad for 15 minutes in mild soap and lukewarm
water.
2Gently squeeze the soap suds through a few times.
3Rinse in fresh, lukewarm water.
Air Drying
1Gently stretch the blanket/mattress pad back to its original size.
2Air dry over a clothesline or hang over a shower rod. DO NOT use clothespins.
3Warming product must be completely dry before using.
Care and cleaning

OF YOUR WARMING PRODUCT

7