Attention New Spa Owner!
Congratulations on the purchase of your new Sundance® 680 series
spa! The following is a list of automated functions and maintenance
recommendations for your new spa. Automated functions have been
listed below in an attempt to suppress any operational concerns you may
have during startup and the rst 24-hours of ownership! Maintenance
recommendations are listed in an attempt to stress their importance in
protecting your new spa.
Automated Operations
Approximately two minutes after power is applied to the spa, the rst
ltration/heating cycle turns on pump 1. In Burlington models, an automatic
ve minute “blow-out” function also activates pump 2 for a period of ve
minutes to ush all lines. Then, after ve minutes, pump 2 turns off and
pump 1 continues to operate for the duration of the cycle. Note: this function
only occurs during the rst ltration/heating cycle each day.
Maintain Healthy Spa Water
Always maintain your spa’s water chemistry within the following parameters
as dened by the Association of Pool And Spa Professionals/USA:
Always maintain your spa lter as outlined below to ensure healthy spa
water. Refer to page 29 for additional information.
Required Filter Maintenance
Your new spa is equipped with an advanced water ltration system that
provides unsurpassed water quality! To ensure maximum water quality at
all times, you should clean and reuse the lter cartridge every month. See
page 25 for detailed lter cleaning/replacement instructions.
Required Water Maintenance
You should replace the spa’s water every 3 months. The frequency
depends on a number of variables including frequency of use, number of
users, and attention paid to water quality maintenance. You will know it
is time for a change when you cannot control sudsing and/or you can no
longer get the normal feel or sparkle to the water, even though the key
water balance measurements are all within the proper parameters. See
page 29 for additional information.
pH 7.2 - 7.4
Free Chlorine 3-5 ppm
Free Bromine 4-6 ppm
Total Alkalinity 100-120 ppm
Calcium Hardness 150-250 ppm