To unlock the temperature setting so that it can be adjusted, simply follow the
instructions above under “To Unlock the Panel.”
Hot tub Maintenance
Proper and regular maintenance of your hot tub will help it retain its beauty
and performance. Your authorized Sundance Dealer can supply you with all
the information, supplies and accessory products you will need to accomplish
this.
Ill. No. 4
Cartridge Filter Removal
CLEANING THE FILTER
Your Sundance hot tub is equipped with a cartridge filter located in the
skimmer/filter well (Ill. No. 3, item 3). Filtering is accomplished when the
2-speed pump 1, on either high or low speed, causes water to flow through
the polyester mesh of the filter. As this happens, suspended particles become
trapped on the filter’s surface (Ill. No. 4).
To ensure optimum performance, it is necessary to remove and clean the fil-
ter cartridge, usually once a week, depending on usage and water quality. To
accomplish this, follow these steps:
1. Turn off power to the hot tub at the home’s breaker panel.
2. Remove the filter lid (Ill. No. 3, item 3).
3. Remove the filter cartridge by loosening the retainer nut on the pipe at
one end of the filter and sliding the filter toward the nut until the other
end is free of the retainer bracket. Lift the filter out as you pull it away
from the filter pipe.
4. Using a garden hose with a high-pressure nozzle, rinse debris from the
filter pleats beginning at the top and working your way downward.
Continue, one section at a time, until you have rinsed all of the filter’s pleats.
To install filter:
Adjust nut to lightly
touch filter face
as shown.
To install filter: To remove filter:
Loosen nut to
provide clearance,
then remove filter.
To remove filter:
CAUTION!
NEVER remove
filter cartridge
while a pump is
running.
ALWAYS
turn-off power
to hot tub
BEFORE
removing
filter cartridge
for cleaning or
replacement.
Page 23