Sunfire HRS-SAT4BIP Features, Mounting Brackets, Binding Posts, Grilles, Threaded Insert

Features

High Resolution Series HRS-SAT4BIP

4

1

2

3

1. Mounting Brackets

Each surround loudspeaker has two keyhole brackets that allow for wall mounting horizontally or vertically.

2. Binding Posts

The gold-plated spring-loaded termi- nals accept bare wire, tinned-wire, or pins. Always use high quality connec- tions and speaker wires, and make sure there are no loose fittings or stray wire strands.

Connect the positive speaker-level output of your power amplifier or receiver to the positive (red) input of the loudspeaker. Connect the negative speaker-level output of your power am- plifier or receiver to the negative (black) input of the loudspeaker.

Make sure that the positive and nega- tive connections do not touch, or this may damage your power amplifier.

3. Grilles

The tweeter and woofer grilles are held in place with small magnets, and can be easily removed if required. Gently pry them off by hand by lifting the cor- ners one at a time.

The magnetic logo badge fits either vertically or horizontally in shallow re- cesses in the woofer grille, depending on how you are using the loudspeaker.

4. Threaded Insert

This 1/4-20 threaded insert allows the loudspeaker to be attached to com- monly available wall mounts, instead of using the keyhole brackets.

User's Manual