Rear Panel Features
1
2 | 3 |
1. Binding Posts | 2. Speaker Wire Channel |
The subwoofer has one pair of bind- ing posts for connection with speaker wire to the output posts of the Sunfire HRSIW8 amplifier.
Always use high quality connections and speaker wires, and make sure there are no loose fittings or stray wire strands. The spring connections accept bare wire or pins.
Connect the positive
Make sure that the positive and nega- tive connections do not touch, or this may damage your power amplifier.
To ease installation, the speaker wiring are passed through these channels to the binding posts. This is recom- mended as the channel will support the weight of the speaker cable, so it does not pull on the binding posts.
3. Clamps
Once the subwoofer is pressed into an opening in the sheetrock, screws on the front panel are turned to pull the clamps out and down to press against the sheetrock, and secure the subwoofer in place.
User's Manual