HDMI JACK
This unit has two HDMI inputs and one HDMI output. It can send digital video and audio signals from DVDs and other sources directly to a display. It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed.
Select an input source from the OSD menu system. (See page 25)
Notes:
•When the HDMI output is connected to a display monitor that does not support HDCP, signals are not output. To view images in HDMI, it is necessary to connect to a display that supports HDCP.
•There may be no image output if connected to a TV or display that is not compatible with the above format.
•Refer to the instruction manual of the TV or display to be connected to the SR4001/SR5001 for detailed information regarding the HDMI terminal.
*HDCP:
CONNECTING HDMI DEVICES
An HDMI cable (sold separately) is used to connect the HDMI jack on the SR4001/SR5001 with the HDMI jack on a DVD player, TV, projector or other component. To transmit multichannel audio via HDMI, the connected
•Disconnecting or connecting cables with the power on can damage the equipment. Turn the power off before disconnecting or connecting cables.
•Some
•If a DVD player that does not support HDMI 1.1 is connected to the SR4001/SR5001, multi channel PCM playback is not possible even with DVD- Audio disks.
•If a DVD player or other device with DVI output is connected to the SR4001/SR5001, a separate audio cable (i.Link,
•Multi channel PCM signals and audio signals of 62 kHz or higher that are input from the HDMI jack are not output from the DIGITAL OUT jacks.
•Depending on the quiality of the cable used, the HDMI signal may be affected by noise.
•Audio units that use sampling frequencies of 128 kHz and above are not supported.
DVD player
HDMI OUTPUT
|
|
| INPUT |
|
|
|
|
|
|
| COMPONENT |
|
| |
|
|
| 1 |
|
|
|
|
|
| INPUT |
|
| ||
|
|
|
|
|
|
|
|
|
| VIDEO |
|
|
| |
|
|
|
|
|
|
|
|
|
| 3 |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| MONITOR |
| |
|
|
|
|
|
|
|
|
|
|
|
| OUT 2 |
|
|
|
|
| INPUT |
|
|
|
|
|
|
|
|
|
| INPUT 1 |
R IN | VCR OUT DSS/VCR2 MONITOR OUT 2 | Y | CB/PB | CR/PR | Y | CB/PB | CR/PR | Y | CB/PB CR/PR |
| ||||
|
| |||||||||||||
|
|
|
|
|
|
|
| 3 | 4 |
| COAX | IN |
|
|
N | OUT | IN | IN | OUT | IN | OUT | 1 | 2 | 3 | OPT | OUT | FLASHER | DC | |
VCR1 | DSS/VCR2 | CD | TAPE |
| CDR/MD |
| DIGITAL IN |
| DIGITAL OUT | IN | TRIGER | |||
|
|
| AUDIO |
|
|
|
|
|
|
|
|
|
| |
| R | L | R | L |
| R | L |
|
|
|
|
|
|
|
| FRONT A | SURROUND BACK | SURROUND | CENTER |
| AC OUTLET |
|
| ||||||
TER. |
|
| SPEAKER C/ |
|
|
| SPEAKER |
| 230V | 50/60Hz |
| |||
| MULTI SPEAKER |
|
|
| SYSTEMS |
| SWITCHED |
|
| |||||
MS |
|
|
|
|
|
|
|
|
|
| 0.65A 150W |
|
| |
VIDEO PROJECTOR
HDMI INPUT
HDMI Ver 1.1
INPUT 2 | OUTPUT |
MODEL NO. SR5001
AC IN
ENGLISH
player must support multichannel audio transmission through its HDMI jack.
HDMI video streaming is compatible with DVI in principle. Therefore, it is possible to connect to a TV or monitor that has a DVI terminal using an
Notes:
•Some HDMI components can be controlled over the HDMI cable, but this receiver cannot control other components this way.
•When connected to a monitor (i.e., TV, projector, etc.) that does not support HDCP, video and audio are not output.
•DVI cables come with
•Some source devices such as DVD players do not support HDMI repeater operations like those of the SR4001/SR5001. In such case, pictures are not properly projected on monitors such as TVs and projectors.
•When multiple components are connected to this receiver, turn power to unused components off to prevent interference between them.
Satellite Tuner
HDMI OUTPUT
23
