REMOTE CONTROL
OPERATION
FUNCTION AND OPERATION
The provided remote control unit is a universal remote controller. The POWER button, numeric buttons and control buttons are used in common across different input source components.
The input source controlled with the remote control unit changes when one of the input selector buttons is pressed.
‹5 |
zLEARN indicator
Indicates when the remote controller is in the LEARN mode.
xSET button
This button is used to enter learn mode and preset mode.
c
/ SOURCE ON/OFF button
This button is used to turn a specific source (such as a DVD player) on or off independently from the rest of the system.
vSLEEP button
This button is used for setting the sleep timer.
9/NIGHT button
Pressing this button prevents the Dolby Digital signal from playback at a loud voice. This function reduces the voice by 1/3 to 1/4 at maximum. Thus, it eliminates the occurrence of an abruptly loud voice at night. However, the function is valid only in the case when the Dolby Digital signal is entered into OPTICAL or COAXIAL and data to compress the voice exists in the signal to be played back.
When this button is pressed, the “NIGHT” indicator is illuminated.
0/7.1CH IN button
Press this button to select the output of an external multi channel decoder.
(+10) A/D button
Used to switch between the analog and digital inputs.
⁄3 CONTROL buttons
These buttons are used when operating PLAY, STOP, PAUSE and other commands of a source.
(When TUNER mode is selected)
T.DISP button
Used to select the display mode in RDS.
PTY button
Used to display the programme type information of the current station.
F.DIRECT button
Used to select the "Frequency direct input".
PRESET +/- buttons
Used to select a preset station up and down.
TUNING +/- buttons
Used to tune a frequency station up and down.
ENGLISH
z | LEARN | SEND | ⁄7 |
|
| ||
x | SOURCE SET | OFF ON | ⁄8 |
b DISPLAY button
m CL (Clear) button
This button is used to erase the memory or program
⁄4
(When AMP mode is selected)
c | l/ | ⁄9 |
SLEEP DISPLAY P.DIRECT SURROUND | ||
v | LIP SYNC/ | ¤0 |
|
| |
| AUTOdts INPUT |
|
Selects the display mode for the front display of the | of a source. | |
SR4001/SR5001. | ||
|
Used to turn off the video signal.
b | 1 | 2 | 3 | BAND | ¤1 |
|
| ¤2 | |||
n | CS | EX/ES | VIRTUAL T.MODE | ||
4 | 5 | 6 |
|
| |
|
|
| |||
| STEREO | NIGHT | P.SCAN | ¤3 | |
| 7 | 8 | 9 |
| |
|
|
| |||
|
| 7.1CH IN | A/D |
| |
m | CL | 0 | +10 | MEMO | ¤4 |
, | CH/ CAT | SPKR A/B | MUTE | VOLUME | ¤5 |
|
| ||||
|
|
|
| ||
. |
| MULTI/ CAT |
| ¤6 | |
|
|
|
| ||
⁄0 |
|
|
|
| ¤7 |
⁄1 | INFO |
|
| MENU | ¤8 |
|
|
|
| ||
|
| ENTER |
| ¤9 | |
|
|
|
|
| |
| T.TONE |
|
|
|
|
⁄2 | /SET UP |
|
| EXIT | ‹0 |
|
|
|
| ||
| REC | T.DISP | PTY | F.DIRECT |
|
⁄3 | - PRESET + | - TUNING + |
| ||
⁄4 |
|
|
|
| ‹1 |
⁄5 | DISC+ | ANGLE | SUB TITLE AUDIO | ‹2 | |
ATT. |
| ||||
⁄6 | BASS | TREBLE | ‹3 | ||
| TV | DVD | VCR | DSS |
|
| TUNER | CD | CDR | MD | ‹4 |
|
|
|
|
| |
| TAPE | AUX1 | AUX2 | AMP |
|
REMOTE CONTROLLER
RC5001SR
nNumeric buttons
These buttons are used to switch between 0 to +10 of the source components.
If the source is set to the amplifier, these buttons are used to perform operations.
(When AMP mode is selected)
1/AUTO button
Used to select auto surround.
2/Dolby button
Used to select DOLBY mode.
3/dts button
Used to select dts mode.
4/CSII button
Used to select CSII mode.
5/EX/ES button
Used to select EX/ES mode.
6/VIRTUAL button
Used to select VIRTUAL mode.
Used to select Multi Channel Stereo.
8/STEREO button
Used to select STEREO mode.
,SPKR A/B button (SR5001 only)
Used to select the speaker system.
The speaker system is switched in the following sequence.
A → B → A+B → off
.CH/CAT3 (UP) / 4 (DOWN) buttons
These buttons are used to change channels.
⁄0 MULTI/CAT button (SR5001 only)
(When AMP mode is selected)
Used to turn on and off multi room.
⁄1 INFO button
(When AMP mode is selected)
When this button is pressed, the current setting are displayed on the TV monitor.
⁄2 T.TONE/SET UP button
(When AMP mode is selected)
Used to enter the test tone menu.
⁄5 DISC+/CH. SEL button
(When AMP mode is selected)
Used to call up SETUP MAIN MENU and adjust speaker levels or 7.1 ch input level.
⁄6 BASS +/- buttons
These buttons are used to adjust the tone control of low frequency sound for left, right and subwoofer speaker.
⁄7 SEND indicator
Indicates when the remote controller is transmitting a signal.
⁄8 
/ POWER ON and OFF buttons
(When AMP mode is selected)
These buttons are used to turn the SR4001/SR5001 on or off.
⁄9 SURROUND button
This button is used to selects the surround mode.
¤0 P.DIRECT button
When this button is pressed, the tone control circuit is bypassed.
9
